
Just in case....power off both the Mac and the FW drive. Double check the cable connection. Start the FW drive first, then the Mac.
If it still doesn't show up...try Disk Util to see if it can see it.
Then DiskWarrior...
Posted by: Steve at October 18, 2003 08:45 PMI had a similar problem with a firewire drive, after using Disk Warrior on it to rebuild the direcory it worked just as normal. Disk warrior is worth the price just to rebuild the directories for speedier hard drive seek time, plus you can save disks when stuff like this happens
Posted by: James Cigler at October 18, 2003 10:16 PMI've had problems with my iMac recognizing a bus powered Firewire drive. For some strange reason, nothing but unplugging the Mac for a few minutes solves the problem, but it does. I think the bus is going bad though. The drive works fine with other Macs.
Posted by: Dave Clark at October 18, 2003 10:24 PMcheck your fire wire cable. mine just stopped working on my external cd burner. when plugged in to my external drive, the drive failed to mount. also, as above disc warrior is pretty cool.
Posted by: aaron miller at October 19, 2003 12:12 AMMike... Don't over look the possibility of the enclosure dying. If you think about it most drives have some unGodly HUGE amount of hours MTBF so the likelyhook of it actually being the mechanism itself is normally not the problem... ah... the enclosure on the otherhand... MOST OF THOSE SUCK. I had TWO die in a 2 hour period last week. One would mount but would NOT allow me to look thru it to my deck. the other just stopped mounting. Pulled the mechanism, put it in another enclosure... all back and happy.
This is just my experience but it's worth a try especially if stuff like disk warrior can't see the drive.
Good luck
Posted by: Chris Fenwick at October 19, 2003 03:12 AM
Alsoft's DiskWarrior is your friend.
Posted by: Josh at October 18, 2003 07:21 PM