
This isn't my day. First Google rejects me, now I have lost connectivity on my G4 desktop. All the other computers on the network - PC's - work fine. But my connectivity on the G4 is down. I hit System Prefs and Network and after a long time loading, the TCP/IP info was set to manual instead of the normal DHCP. When I click the DHCP configuration setting, all the info like IP Address, Subnet Mask, Router and DHCP Client ID set to the 255.255.255.255 address. What's up with this? Could it be a still-not-fixed glitch from the infamous OS X 10.2.8 update? The only cause-and-effect thing I could trace this to would be a sudden loss of power and the computer shut down yesterday when I accidentally unplugged the power cord. And the system clock wasn't keeping correct time and had to be reset a couple of times. What am I to do here?
UPDATE
There won't be many posts here for a while. I'm stumped and the main system I have is offline and looks like it will have to be until it can go in for service. I tried Airport and zilch. Have no idea what plist to delete or if that would help. But I've done the 10.2.8 combo update, tried new Ethernet cables, searched Aple's online support and tried to connect with Airport. Nothing seems to help. I have absolutely no connectivity with airport or Ethernet. Everything else seems to work fine. I've spent now the entire day on this. It sure has me stimped and many of you, too.
Thanks everyone for the suggestions. Untl the G4 gets working, I'll be doing most of my work on a PC.
Tried thast... no luck.
Posted by: Mike at October 8, 2003 08:52 AMIf you have the ability to download a large file and transfer it to the G4 (say with a shiny new G5?), try getting the OS X 10.2.8 "Combo" update, which does a more complete upgrade of OS X. You can get it at http://docs.info.apple.com/article.html?artnum=25525
If your loss of connectivity is related to 10.2.8, that should fix it. Otherwise, you'll probably have to do an archive and install (http://docs.info.apple.com/article2.html?artnum=107120 ), paying particular attention to step 10 to preserve your settings, and then reinstall the Combo update.
I've not had one lick of trouble with Jaguar on my machine nor any of the others I support, so I am sorry this has happened to you. Good luck.
Posted by: ToeKnee at October 8, 2003 10:03 AMMaybe I'm reaching for straws here, but how about a modem reset or dumping the network preferences? Like ToeKnee, I have had no problems with 10.2.8 even though I was one of the people who updated with the initial (pulled) file. Frankly I don't think the Combo update is going to help. Let us know how it all turns out and I'll offer more suggestions should they pop into my head.
jim
Posted by: James Ochs at October 8, 2003 01:19 PMJim-I am not so sure, either, but it will 99% rule out the OS if he does the Combo update (and it only takes a few minutes).
Mike-You should rule out the ethernet cable/router/network, too, by unplugging the cable from the back of the G4 and plugging it into the G5 to see if it grabs an IP address.
Another thing to try-- create a new user in System prefs and log out and log in as that user. If that works, it's in your own configuration somewhere, probably a plist pref.
I find that most of the troubleshooting I do with modern complicated systems is to eliminate possibilities. There is just so much to go wrong!
And I agree, please post back and let us know what is up. Thanks, T
Posted by: ToeKnee at October 8, 2003 01:28 PMNo luck.
I'm at wit's end here.
I've tried all of the above.
In that case, I would suspect your ethernet card went bad-- perhaps a jolt from the unplugging/replugging.
Another way to test that is to boot into OS 9--if yours is OS 9 bootable. If you have the same trouble, it's definitely hardware.
T
Posted by: ToeKnee at October 8, 2003 04:01 PMThat's what I'm thinking... does the G4 take a standard 10/100 T ethernet card?
Posted by: Mike at October 8, 2003 04:12 PMIt IS the card... brought the G5 evaluation unit up and it connects fine via Ethernet... also opened the G4 and I see no easy way to pop in a new card. It ;looks like its buried under the heat sink. Where do I go to get one installed?
Posted by: Mike Wendland at October 8, 2003 04:36 PMIn answer to the first question, not every ethernet card will work, because there have to be Mac drivers for it.
I would make darn sure that is your problem, however, before getting a tech to look at it. If it is not one of the latest models, you should be able to boot into OS 9 (you didn't mention if you'd tried that) to verify no ethernet.
You also have a ton of Apple Authorized Service Providers in eastern Michigan:
http://applefn.infonow.net/bin/findNow?CLIENT_ID=APPLE_SVC_USA
Hi, me again. if the G4 has an airport card but you don't have a wireless basestation, you can get it online courtesy of your G5 loaner-- turn on Internet sharing in the Sharing Preference panel on the G5, turn on Airport on the G4, and viola!
T
Posted by: ToeKnee at October 8, 2003 06:12 PMNot so fast on the Network card... I installed an Airport card in the G4. It doesn't take.
Same thing... no connections... wonder if I can clear prefs or plist somehow... wher do I go? Step-by-step help needed please.
The procedure is to disconnect all peripherals except the display, keyboard and mouse, disconnect the power cord, open the computer and ground yourself on something metal. There is a button on the motherboard labeled, "prm reset" which is the power reset for the mother board. Press the button for about 2 seconds then close the computer, hook up the power cable and press the power button again.
Posted by: speedy at October 8, 2003 08:37 PMNEW DEVELOPMENT...
Booting up in OS 9 I was able to get Internet connectivity through Aiport... That's good, right?
BUT,,, resetting PRAM makes no difference.
OS X network still doesn't work.
What should I try next?
Since Airport works, I think there is too much coincidence here between your problems and the recent 10.2.8 known issues. I would do an archive and install and reinstall 10.2.x and just see if ethernet works again. If it does, perhaps you want to only update to 10.2.6 and leave well enough alone.
Here's an excellent step by step for the process:
http://www.macosxhints.com/article.php?story=2003100317550644
(You never wrote whether your G4 is OS 9 bootable, whether you tried that)
T
Posted by: ToeKnee at October 8, 2003 09:01 PMHave you tried:
Making a new user and messing with the connections there.
Doing an archive install with 10.2, telling it to keep your user settings (or not).
You could start tinkering under the unix hood, but if it were me I'd do a new install or at least try a new user to see if it's your user that hosed.
Posted by: Keynoteuser at October 8, 2003 10:53 PMI've done a complete reinstall... all my settings are lost (I forgot to kep them) but I have connectivity again... now I need to rebuild all my prefs again.
Posted by: Mike Wendland at October 8, 2003 11:54 PMCould this be the first step on the slippery slope of the transition from Mac Mike back into PC Mike? Stay tuned!
Posted by: Scott N. at October 9, 2003 12:24 AMAnd "back to the PC" becomes the mantra we all live by when our simpler Mac life starts to resemble PC life. I join you in the frustration! Instead of cranking out system after system at $129 a pop, how about getting one that works well for a while? I have similar issues with my PC and Mac splitbrain at work. Today's decision - do I keep that Gateway laptop that connects by wireless to our server or spend another day messing with the Powerbook I love (some days)! Good Luck!
Posted by: Chuck Peterson at October 9, 2003 01:03 AMis there any apple store near you?
maybe you can ask one of those genius bar or whatever they call them....
MIKE--It looks like the guy over at ResExcellence found the solution:
"My battle with 10.2.8 and the disappearing ethernet connection totally blasted my head...
...There was one little extension that caused the whole mess:
AppleGMACEthernet.kext
...once I manually replaced the 10.2.8 version with the one from 10.2.6 everything was back to normal."
Posted by: Charles Gaba at October 9, 2003 07:39 AMAlas, the solution Charles suggested was the first thing I tried yesterday... with no luck.
After doing an archive and reinstall, I'm conencted back to my G4.
Today's problem is making sure everything works right and I'll be spending the morning tweaking all the software.
If you are longing for Windows "System Restore" then do something proactive about it. Use Carbon Copy Cloner to keep a working image of your system as a backup. Then you can easily re-image your drive.
And you have to admit, doing an Archive and Install isn't that bad (and pretty swift!) if you do it right.
Posted by: Carlos at October 11, 2003 12:37 AM
Mike,
Posted by: J Ochs at October 8, 2003 08:48 AMYou can try zapping the PRAM and repair permissions and if all else fails, try a utility (DiskWarrior, Disk First Aid, etc.) I have had no problems with connectivity on my G4 (iMac Flat Panel.)