
Drat. Solve one problem, encounter another. My Airport Extreme Wi-Fi network is working flawlessly - except that one of the Windows machines no longer accesses a printer.
I use two printers. An HP 5500 that is plugged into the Airport Extreme base station. My desktop and laptop Macs access that just fine.
But my two Windows XP machines have an HP psc 950 printer. The 950 printer is connected by USB direectly to the Dell. An HP computer used to get that through the wireless network. No longer can it find it.
Here's this weekend's switching dilemma: I'd like the two Windows machines to find and print to the 950, the Macs to the 5500. That's my ideal solution.
Short of that, I'd be happy if the HP could print to the 5500 with the two macs. I need the 950 to be dedicated to the Dell as I do a lot of photo printing with the 950.
I'm a puzzlin' over this. Any ideas? Anyone?
No... that doesn't work. I lose Internet connectivity when I uncheck.
Posted by: mac-mike at March 14, 2003 10:11 AMI sent this through email, but in case you're checking this more often: Do you have a router/gateway that's doing the IP serving for the wired machines? When you uncheck the box, you'll lose connectivity until you renew the IP addresses of the wireless machines. Once that's done, you should get new IP addresses from the other gateway -- the one that's supplying the addresses to the wired side of the network.
You may have to turn the connections on/off, or suspend/resume, or reboot, to get the DHCP leases to renew.
Once all the machines are on the same subnet, things should -- should -- work...I've got a similar setup here, with three APExtremes, that works fine.
To diagram:
---Cable/DSL---
|
Hardwired router (does DHCP)
|
Switch (or whatever)
Arghhh!!! I need my Airport password to run the utility and... I forgot it.
Is it written down anywhere? Seems like it was the last several numbers on tha base station?
You should be able to find the airport password in your keychain access file.
Applications/Utilities/Keychain Access
You can also get access to the Airport by hitting the button on the back -- the APE manual has details (I don't have access to my manual at the moment or I'd give more specific instructions...sorry, Mike.)
Posted by: Dave Nanian at March 15, 2003 09:42 AMI don't believe that you can use a PC with an 802.11 card to print to a printer through an Airport Extreme base station. For that matter, I believe that it ONLY works with Jaguar 10.2 (10.2.3?) or higher and requires AppleTalk to work.
I had a customer who had a PC, Bronze G3 Lombard (no Airport card, Lucent 802.11 pc card) laptop and G4 Titanium, all with wireless on an AirportExt with a HP USB printer plugged into the Airport. The only machine I could make see the printer was the G4 laptop. The bronze G3 "might" have seen the card if they had the new IOxperts (www.ioxperts.com) driver because the free driver (wirelessdriver.sourceforge.net) does not allow Appletalk printing but does allow Appletalk shares to be used.
This shouldn't be a problem with IP addresses - the PC just can't print to it in its native state. "Maybe" if there were software to allow a PC to print to an Appletalk printer (not sure on this) it could happen but I think that the printer sharing is something specific to OS 10.2's Print Center .
Posted by: Jeff Costantino at March 23, 2003 12:05 PM
Mike, you've probably already tried this, but what the heck: if you've already got a router on your network distributing IP address, make sure the AirPort Extreme Base Station is set to *not* distribute IP addresses (use the AP Admin Utility -- it's on Show All Settings | Network: uncheck "Distribute IP addresses").
This should ensure that everything's on the same subnet, which will probably solve the problem.
Posted by: Dave Nanian at March 14, 2003 09:26 AM